Home-automation OmniPro II Manual de usuario

HOME AUTOMATION, INC. Control & Security System Owner's Manual Document Number 20R00-2 R

OVERALL DESCRIPTION Console Operation The console is designed with everything that is necessary for you to program and operate your OmniPro II contr

NOTE TO INSTALLER Following installation, this manual shall be left for the homeowner's use. HAI •

6- UP ARROW The Up Arrow key is used to scroll through menus and lists. The Up Arrow is used to scroll back through a list (for example, if you have

When using the arrow keys to scroll through lists of areas, buttons, codes, temperature zones, units, or zones, only the named items are displayed. I

Confirmation Beep When you have successfully completed a function, such as entering a program or changing a setup item, the console will beep once.

SECURITY SYSTEM OPERATION Disarming the Security System and Silencing Alarms Before going any further, you should know how to disarm your security

2 = NIGHT The NIGHT mode is used when you are asleep and everyone in your household is at home. In the Night mode, your doors, windows, and non-slee

Quick Arm For extra convenience, the OmniPro II can be armed by simply pressing the DAY, NIGHT, or AWAY button twice, eliminating the need to enter t

#=GOTO To Bypass or Restore a zone in another area, you must first "go to" that area by selecting #=GOTO. AREA: ENTER AREA: At th

For more information on the digital and voice dialer - See Digital Dialer and Voice Dialer. • The system continues to sound all alarms and flash the

Police Emergency When the 1 key and the 3 keys are pressed simultaneously, the Police Emergency alarm is activated. This alarm operates exactly the

Copyright © 2001-2006 Home Automation, Inc. All Rights Reserved

Trouble Indications The OmniPro II constantly monitors the alarm zones and several internal matters and will alert you if it detects trouble. The pa

Manager Code The Manager codes can arm/disarm the security system in assigned areas, during assigned times. The Manager code can access functions th

If the ' 0 ' (ALL) key had been selected, the display will show: DISARM ALL AREAS ENTER CODE: #=AREA As the four-digit code

Testing Your System HAI recommends testing your system on a weekly basis to ensure that you are fully protected. 1. Notify your Central Station tha

CONTROL Control Commands The control features of the OmniPro II make it easy and convenient to control almost any light or appliance from the consol

When set to UPB, the OmniPro II controller can: ¾ Send commands (on, off, bright, dim and level) to individual switches and modules ¾ Receive comma

When “Status Tracking” is enabled (this is the default setting), OmniPro II keeps track of the exact status of each unit even when a lighting scene is

A Zone is any individual RadioRA Switch or Dimmer. A RadioRA System has a maximum of 32 Lighting Zones. Zone Numbers can be used to identify any indi

Unit Numbers OmniPro II systems have 511 total Unit Numbers. They consist of HLC, UPB, CentraLite, RadioRA, ALC, Compose, and X-10 module unit numbe

Scrolling Through Names The OmniPro II stores names for Units, Zones, Buttons, Codes, Temperatures, and Messages so that you don't have to reme

Contents INTRODUCTION...

Each lighting scene can also be set or easily changed using the pushbuttons on the HAI UPB™ 6-Button Room Controller, as follows: Step Operation 1 Pr

¾ Press 4 (LVL) to set the desired lighting level of the selected unit (0%-100%). ¾ 5 (RMP) does not affect CentraLite units. ¾ Press 9 (TIM) to ti

Ramp Command (ALC) When ALC Switch Modules are being used, it is possible to ramp the lighting level of an ALC Dimmer Switch to a new level at a sele

Timed Commands The timed commands allow a units to be turned on or off for a specified period of time. The unit may be turned On for 1-99 (minutes o

Controlling Outputs The OmniPro II has eight outputs that can be used to switch relays. Outputs 1-8 are controlled as Unit Numbers 385-392, respecti

NOTE: The All Off function can be changed, if desired - See Set Up Misc, All On And All Off. Leviton Scene Control OmniPro II supports Leviton Scene

Scene Off Command Once the Scenes have been sent, press the 0 (OFF) key to command the four units in that Scene to turn off. Notes: 1. When sendi

Executing Phantom Buttons OmniPro II can turn on and turn off each of the 17 possible Phantom Buttons. Phantom Buttons must be pre-programmed into t

Buttons A powerful feature of the OmniPro II is the ability to program Buttons. A Button (also known as macro) is a number on the keypad that is pro

HAI RC-Series Thermostats The following control actions are allowed for HAI Communicating Thermostats: • Set heating setpoints • Set cooling setp

CONTROL ...

The fan control on a thermostat may be switched between on and auto by selecting 4 (FAN) from the temperature menu: Upstairs FAN 0=AUTO 1=ON

The following control actions are allowed on PESMs: • Turn Energy Saver On and Off • Turn Energy Saver On and Off for a specified time • Set heat

Downstairs 0=OFF 1=ON 2=HEAT ↓ Downstairs 3=COOL 9=TIME #=STAT ↑ ENTER TIME MINUTES (1-99) #=H/M/S Downst

Upstairs 2=LOW 3=HIGH #=STAT For negative temperatures (-1o to -40o), press the ' # ' key prior to entering the temperature to

Status The Status function is used to display the status of various items in the system. To enter the status menu, from the top-level display or the

Press 1 (CTRL) to view the current status of each unit and to configure the HLC device that is assigned for each unit. The console will display:

2 = ZONE The Zone Status menu allows you to view and scroll through the status of each zone input. To enter the Zone menu, from the Status menu, pr

The next series of displays shows the current analog reading for each security zone input. The displays show the readings for zones 1-176. 1=

Event Log The Event Log records the 250 most recent significant security system Events (happenings) and trouble conditions in the system. When a new

Messages The Message menu is used to play and record the memo message and to quickly clear all text messages. The memo message is an eight-second vo

Humidity...

Show Message The 1 (SHOW) key allows you to display the selected text message(s) on the console's top-level display. This can be a helpful re

Send Message (Pro-Link) The 6 (SEND) key allows you to send any of the text messages through the Pro-Link serial port. You are first prompted to spe

TELEPHONE CONTROL Telephone Interface Your OmniPro II is equipped with a built-in telephone response feature that allows you to control and access t

Phone Access Denied - Remote Lockout The OmniPro II has a remote lockout feature to discourage youngsters (and adults who act that way) from trying

1 - Control Press 1 from the MAIN MENU to get to the CONTROL menu. If voice descriptions have been programmed, after a three-second delay, the syste

Press the temperature zone you wish to control, then press #. Press the ' 0 ' key to select all HAI Thermostats. This is a simple way to b

8 - Message This command allows you to record and verify the voice memo message, allows you to record and play custom messages (phrases), and allows

To play one of the custom phrases, press the 6 key. " PLAY PHRASE: ENTER PHRASE NUMBER, THEN POUND." Press the phrase number (1-60) you

Emergency Dial-Out Emergency dial out consists of two distinct parts: the "digital dialer" and the "voice dialer." Digital Dial

After it has dialed the last number in the dial order, the OmniPro II stops dialing and reconnects the in-house phones. What You Hear - If Your OmniP

PC Access ...

Built-In Ethernet Port The built-in Ethernet port (J6) allows a device to connect to the OmniPro II controller via a network (i.e. Ethernet, Internet

192.168.0.101192.168.0.50192.168.0.51HAI OmniPro IIControllerHub orRouterComputerComputer To connect to an OmniPro II controller on a local networ

To connect to an OmniPro II controller on a local network using HAI PC Access, under Configure >> Network enter the controller’s IP ad

SETUP Configuration and Advanced Control Programming (ACP) The Setup menu is used to configure operating parameters, program your system to do its a

The display will show all areas that have been enabled for that user. After the area(s) is/are selected, press the ' # ' key. CODE 2 AR

Advanced Control Programming (ACP) Your OmniPro II can be programmed to do automated control and security functions on a time schedule or in response

Menu 1 - Programs for a particular control unit number Menu 2 - All Security related programs Menu 3 - Programs for a particular macro button Menu

The arrow keys are used to scroll through the programs. Pressing the ' # ' key while a particular program is displayed will allow that prog

Edit Programs When Selecting the 1 (WHEN) key, from the Edit Program menu, allows the time or button/event that activates the program to be changed.

Button and Event Programs Selecting 2 (BUTTON), from the "Edit When" menu, sets up a program to be activated when a macro button is execute

Set Up Dial ...

Corresponding Switch Table Switch OmniPro II UPB 6-Button Keypad UPB 8-Button Keypad RadioRA Master Control ALC 4-Button 1 2 On Button 1 or E

AREA: ENTER AREA 0=ALL ↓ The area number should be entered followed by the ' # ' key, or the arrow keys may be used to sc

Alarm Event Buttons Pressing the 5 (ALARM) key allows you to specify an event button activated upon the occurrence of an alarm. You are first pro

The arrow keys are used to select from a list of event buttons: • WHEN ENERGY LO • WHEN ENERGY MID • WHEN ENERGY HI • WHEN ENERGY CRIT • WHEN PH

Edit Program Command Selecting 2 (CMD), from the Edit Program menu, allows the commanded action for the program to be specified. The following m

Unit Toggle Command Using HAI PC Access Software, you can create programs to toggle any unit (1-511) from its current state to the opposite state.

Program Video Commands* This program command is used to display video automatically on an OmniTouch with Video touchscreen when an event occurs. You

Edit Program Condition Selecting the 3 (&COND) key, from the Edit Program menu, allows the condition for the program to be specified. The condit

The zone will be displayed and you will be prompted for the state of the zone: IF Front Door: 0=SECURE 1=NOT RDY Program Time Clock Cond

Set Up Dial The Set Up Dial menu is used to configure all of the telephone related items for the OmniPro II. To enter the Set Up Dial menu, from the

Dial Out Number 1 Dial Out Number 1 is one of the 8 numbers that are stored in the system. In the event of an alarm, these numbers are dialed in the

Set Up Arming To configure different arming and disarming options, from the Setup menu, press the 5 (ARM) key. Entry Delay The Entry Delay is the t

Enable Quick Arm The Quick Arm feature allows the security system to be armed by pressing the desired mode key twice instead of having to enter your

Enable Freeze Alarm If there are one or more Thermostat or PESM in a system, they can also be used to detect a freeze condition - See Freeze Alarm.

House Codes 1-16 All On This feature allows you to choose if House Code 1-16 will respond to the “All On” command. Press the 0 key to select No and

Latitude, Longitude, and Time Zone The system automatically calculates the time of sunrise and sunset each day. Sunrise/sunset can be specified as t

DST START WEEKEND: FIRST SUNDAY #=CHNG  DST END MONTH: 10 1-12 0=DISABLE  DST END WEEKEND:

Encryption Key Encryption and decryption of data between the OmniPro II controller and the connected device is based on the Advanced Encryption Sta

Set Up Voice The OmniPro II can be set up to speak descriptive names such as "FRONT DOOR" for control zones, units, buttons, codes, tempera

UNDERWRITER'S LABORATORIES REQUIREMENTS For a complete list of requirements and restrictions when installing the OmniPro II panel in a UL Liste

INTRODUCTION Thank you for purchasing your new OmniPro II automation system. You are about to enjoy a new feeling of security, comfort, convenience

FEDERAL COMMUNICATION COMMISSION NOTICE: 1. This equipment complies with Part 68 of FCC Rules. On the door, inside of the OmniPro II enclosure, is

CANADIAN INDUSTRY CANADA NOTICE Notice: The Industry Canada label identifies certified equipment. This certification means that the equipment mee

APPENDIX A - DIAL OUT PLANNER Use the following dial-out planner to help you set-up the voice dial-out numbers: OmniPro II Voice Dial-Out Planne

INSTRUCTIONS TO CALLED PARTY Dear ___________________________________________________________________ I have programmed my OmniPro II Home Automat

APPENDIX B - TEXT DESCRIPTION CHARACTER CODES CODE CHAR CODE CHAR CODE CHAR CODE CHAR00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18

Page 87 APPENDIX C - VOICE DESCRIPTION CODES CODE DESCRIPTION 255 (ADDRESS MSG) 58 (BEEP) 254 (MEMO MESSAGE) 29 (PAUSE) 30 (SHORT PAUSE) 26 A. M.

Page 88 CODE DESCRIPTION CODE 341 FALL 80 FAMILY 81 FAN 342 FATHER’S 343 FAULT 344 FEBRUARY 217 FENCE 5 FIFTEEN 17 FIFTY 218 FILE 345 FILTER 82 FIRE

Page 89 CODE DESCRIPTION CODE 444 ONLINE 445 ONLY 233 OPEN 446 OPTION 131 OR 447 OTHER 448 OUT 132 OUTDOOR 133 OUTLET 449 OUTSIDE 450 OVER 234 OVERF

CODE DESCRIPTION CODE 250 VAULT 536 VCR 537 VIDEO 538 VISITOR 539 VOLUME 540 WAITING 541 WALK 542 WALKWAY 251 WAREHOUSE 543 WARNING 187 WATER 544 WED